What is the minimum cable specification that supports 1000 Mbps Ethernet?

You want to implement an Ethernet network at very long distances using fiber optic cables. Which standard and cable type would you choose?

Ethernet 100BaseFX networks use what type of cabling?

Which of the following Ethernet standards uses fiber-optic cabling?

Your network follows the 100BaseFX specifications for Fast Ethernet and uses half-duplex multi-mode cable. What is the maximum cable segment length allowed?

Your network follows the 100BaseTX specifications for Fast Ethernet. What is the maximum cable segment length allowed?

You have been tasked with designing an Ethernet network. Your client needs to implement a very high-speed network backbone between campus buildings, some of which are around 300 meters apart. Multi-mode fiber optic cabling has already been installed between buildings. Your client has asked that you use the existing cabling. Which Ethernet standard meets these guidelines?

What type of cabling is used with 100BaseTX Fast Ethernet networks?

What topology is used with 100BaseTX Fast Ethernet networks?

Which of the following are requirements of the 1000BaseT Ethernet standards?

You are planning a network for an educational campus. Due to the size of the buildings and the distance between them, you have elected to use 10BaseFL hubs, cabling, and network interface cards. What is the maximum length for the network cable between a workstation and a hub?

Which Gigabit Ethernet standard uses multimode fiber optic cabling and supports network segments up to a maximum of 550 meters long?

You have been tasked with designing a high-speed Ethernet network. Your client's building already has 150-ohm shielded twisted pair (STP) wiring installed. Due to budget constraints, they have asked you to reuse the existing wiring instead of installing new fiber optic cabling. Which Ethernet standard could you implement in this situation?

Which Gigabit Ethernet standard can support long network segments up to a maximum of 5 km when used with single-mode fiber optic cable?

You would like to implement 10 Gbps Ethernet over a distance of 1 kilometer or greater. Which of the following would be the minimum requirement for the implementation?